config.yaml

Rama main · réplica de lectura del repositorio original.

# There is a built-in micro proxy that will host the webui and REST API all on
# one port (this is called the "Single HTTP Frontend") and means you just need
# one open port in the container/firewalls/etc.
#
# Listen on all addresses available, port 1337.
# If the PORT environment variable is set, it overrides this port (host is kept).
listenAddressSingleHTTPFrontend: 0.0.0.0:1337

# Choose from INFO (default), WARN and DEBUG
# Docs: https://docs.olivetin.app/advanced_configuration/logs.html
logLevel: "INFO"

# Actions are commands that are executed by OliveTin, and normally show up as
# buttons on the WebUI.
#
# Docs: https://docs.olivetin.app/action_buttons/create_your_first.html
actions:
  # Lots of people use OliveTin to build web interfaces for their electronics
  # projects. It's best to install OliveTin as a native package (eg, .deb), and
  # then you can use either a python script or the `gpio` command.
  - title: Toggle GPIO light
    shell: gpioset gpiochip1 9=1 || true # The "|| true" is to ignore errors the demo environment doesn't have GPIO access.
    icon: light

  # Lots of people also use OliveTin to monitor their servers, like checking
  # disk space, or checking logs. `onclick: execution-dialog` shows output.
  - title: Check disk space
    icon: disk
    shell: df -h /
    onclick: execution-dialog

  # This uses `onclick: execution-dialog` to show a dialog with more
  # information about the command that was run.
  - title: Check shell history
    shell: cat ~/.bash_history
    icon: logs
    onclick: execution-dialog

  # Every action can still be run on demand from the web UI or API. The keys
  # below are optional *additional* triggers (see each action and
  # https://docs.olivetin.app/action_execution/ ).
  #
  # This is the most simple action, it just runs the command and flashes the
  # button to indicate status.
  #
  # If you are running OliveTin in a container remember to pass through the
  # docker socket! https://docs.olivetin.app/solutions/container-control-panel/index.html
  - title: Ping the Internet
    shell: ping -c 3 1.1.1.1
    icon: ping
    onclick: execution-dialog
    # https://docs.olivetin.app/action_execution/onstartup.html
    execOnStartup: true

  # You can also rate-limit actions too.
  - title: Sync Disks
    shell: sync
    id: syncdisks
    icon: disk
    onclick: execution-button
    maxRate:
      - limit: 3
        duration: 1m

  # You are not limited to operating system commands, and of course you can run
  # your own scripts. The backup-jobs action group limits how many backup-related
  # actions can run at once; extra requests are queued instead of blocked.
  # There is also a timeout that will kill the command if it runs for too long.
  - title: Run backup script
    shell: /opt/backupScript.sh
    shellAfterCompleted: "apprise -t 'Notification: Backup script completed' -b 'The backup script completed with code {{ exitCode}}. The log is: \n {{ output }} '"
    groups: [ backup-jobs ]
    timeout: 10
    icon: backup
    onclick: execution-dialog
    # https://docs.olivetin.app/action_execution/oncalendar.html
    # execOnCalendarFile: examples/demo-olivetin-calendar.yaml

  - title: Verify backup archive
    shell: sleep 3 && echo "Backup archive verified"
    groups: [ backup-jobs ]
    timeout: 30
    icon: backup
    onclick: execution-dialog

  # When you want to prompt users for input, that is when you should use
  # `arguments` - this presents a popup dialog and asks for argument values.
  #
  # Docs: https://docs.olivetin.app/action_examples/ping.html
  - title: Ping host
    id: ping_host
    shell: ping {{ host }} -c {{ count }}
    icon: ping
    timeout: 100
    onclick: history
    # https://docs.olivetin.app/action_execution/onwebhook.html — POST to /webhooks
    # with header X-OliveTin-Demo: ping-host (path and payload rules are documented).
    execOnWebhook:
      - matchHeaders:
          X-OliveTin-Demo: ping-host
    arguments:
      - name: host
        title: Host
        type: ascii_identifier
        default: example.com
        description: The host that you want to ping

      - name: count
        title: Count
        type: int
        default: 3
        description: How many times to do you want to ping?

  # OliveTin can control containers - docker is just a command line app.
  #
  # However, if you are running in a container you will need to do some setup,
  # see the docs below.
  #
  # Docs: https://docs.olivetin.app/solutions/container-control-panel/index.html
  - title: Restart Docker Container
    icon: restart
    shell: docker restart {{ container }}
    arguments:
      - name: container
        title: Container name
        choices:
          - value: plex
          - value: traefik
          - value: grafana

  # There is a special `confirmation` argument to help against accidental clicks
  # on "dangerous" actions.
  #
  # Docs: https://docs.olivetin.app/args/input_confirmation.html
  - title: Delete old backups
    icon: ashtonished
    # A single space requires justification with no prefilled template (empty disables it).
    justification: " "
    shell: rm -rf /opt/oliveTinOldBackups/ && sleep 5
    arguments:
      - type: html
        title: Description
        default:
          The documentation for this action can be found at <a href = "example.com">example.com</a>.
      - type: confirmation
        title: Are you sure?!

  # Checklist arguments let users pick multiple predefined options. Selected
  # values are passed to the action as a JSON array string.
  #
  # Docs: https://docs.olivetin.app/args/input_checklist.html
  - title: Backup selected directories
    icon: backup
    shell: 'echo "Backing up: {{ directories }}"'
    arguments:
      - name: directories
        title: Directories to back up
        type: checklist
        description: Select one or more directories to include in the backup.
        choices:
          - title: Documents
            value: documents
          - title: Photos
            value: photos
          - title: Music
            value: music
          - title: Videos
            value: videos
        default: '["documents","photos"]'

  # This is an action that runs a script included with OliveTin, that will
  # download themes. You will still need to set theme "themeName" in your config.
  #
  # Docs: https://docs.olivetin.app/reference/reference_themes_for_users.html
  - title: Get OliveTin Theme
    exec:
      - "olivetin-get-theme"
      - "{{ themeGitRepo }}"
      - "{{ themeFolderName }}"
    icon: theme
    arguments:
      - name: themeGitRepo
        title: Theme's Git Repository
        description: Find new themes at https://olivetin.app/themes
        type: url

      - name: themeFolderName
        title: Theme's Folder Name
        type: ascii_identifier

  # Sometimes you want to run actions on other servers - don't overcomplicate
  # it, just use SSH! OliveTin includes a helper to make this easier, which is
  # entirely optional. You can also setup SSH manually.
  #
  # Docs: https://docs.olivetin.app/action_examples/ssh-easy.html
  # Docs: https://docs.olivetin.app/action_examples/ssh-manual.html
  - title: "Setup easy SSH"
    icon: ssh
    shell: olivetin-setup-easy-ssh
    onclick: execution-dialog
    # Second webhook example: POST /webhooks?demo=setup-ssh
    execOnWebhook:
      - matchQuery:
          demo: setup-ssh

  # Here's how to use SSH with the "easy" config, to restart a service on
  # another server.
  #
  # Docs: https://docs.olivetin.app/action_examples/ssh-easy.html
  # Docs: https://docs.olivetin.app/action_examples/systemd_service.html
  - title: Restart httpd on server1
    id: restart_httpd
    icon: restart
    timeout: 1
    shell: ssh -F /config/ssh/easy.cfg root@server1 'service httpd restart'

  # There are several built-in shortcuts for the `icon` option, but you
  # can also just specify any HTML, this includes any unicode character,
  # or a <img = "..." /> link to a custom icon.
  #
  # Docs: https://docs.olivetin.app/action_customization/icons.html
  #
  # Lots of people use OliveTin to easily execute ansible-playbooks. You
  # probably want a much longer timeout as well (so that ansible completes).
  #
  # Docs: https://docs.olivetin.app/action_examples/ansible.html
  - title: "Run Automation Playbook"
    icon: '&#129302;'
    shell: ansible-playbook -i /etc/hosts /root/myRepo/myPlaybook.yaml
    timeout: 120

  # The following actions are "dummy" actions, used in a Dashboard. As long as
  # you have these referenced in a dashboard, they will not show up in the
  # `actions` view.
  - title: Ping hypervisor1
    shell: echo "hypervisor1 online"

  - title: Ping hypervisor2
    shell: echo "hypervisor2 online"

  - title: Ping hypervisor3
    shell: echo "hypervisor3 online"

  - title: Ping hypervisor4
    shell: echo "hypervisor4 online"

  - title: "{{ server.name }} Wake on Lan"
    shell: echo "Sending Wake on LAN to {{ server.hostname }}"
    icon: <iconify-icon icon="carbon:awake"></iconify-icon>
    entity: server

  - title: "{{ server.name }} Power Off"
    shell: "echo 'Power Off Server: {{ server.hostname }}'"
    icon: <iconify-icon icon="carbon:flash-off"></iconify-icon>
    entity: server

  - title: "{{ server.name }} Print server name"
    shell: 'echo "Server name: {{ server.name }}"'
    entity: server

  - title: Ping All Servers
    shell: "echo 'Ping all servers'"
    icon: ping
    # https://docs.olivetin.app/action_execution/onfilecreated.html
    # mkdir -p /tmp/olivetin-demo-file-created
    # execOnFileCreatedInDir:
    #   - /tmp/olivetin-demo-file-created

  - title: Start {{ .CurrentEntity.Names }}
    icon: box
    shell: docker start {{ .CurrentEntity.Names }}
    entity: container
    triggers: ["Update container entity file"]

  - title: Stop {{ .CurrentEntity.Names }}
    icon: box
    shell: docker stop {{ .CurrentEntity.Names }}
    entity: container
    triggers: ["Update container entity file"]

  - title: Long running action
    shell: sleep 300
    timeout: 300
    icon: logs
    onclick: execution-dialog
    groups: [ con2queue10 ]
    execOnCron:
      - "@hourly"

  # Lastly, you can hide actions from the web UI, this is useful for creating
  # background helpers that execute only on startup or a cron, for updating
  # entity files.

  # - title: Update container entity file
  #   shell: 'docker ps -a --format json > /etc/OliveTin/entities/containers.json'
  #   hidden: true
  #   execOnStartup: true
  #   execOnCron: '*/1 * * * *'

# An entity is something that exists - a "thing", like a VM, or a Container
# is an entity. OliveTin allows you to then dynamically generate actions based
# around these entities.
#
# This is really useful if you want to generate wake on lan or poweroff actions
# for `server` entities, for example.
#
# A very popular use case that entities were designed for was for `container`
# entities - in a similar way you could generate `start`, `stop`, and `restart`
# container actions.
#
# Entities are just loaded fome files on disk, OliveTin will also watch these
# files for updates while OliveTin is running, and update entities.
#
# Entities can have properties defined in those files, and those can be used
# in your configuration as variables. For example; `container.status`,
# or `vm.hostname`.
#
# Docs: https://docs.olivetin.app/entities/intro.html
entities:
  # YAML files are the default expected format, so you can use .yml or .yaml,
  # or even .txt, as long as the file contains valid a valid yaml LIST, then it
  # will load properly.
  #
  # Docs: https://docs.olivetin.app/entities/intro.html
  - file: entities/servers.yaml
    name: server
    icon: ssh
    properties:
      - name: hostname
        title: Hostname
      - name: ip
        title: IP

  - file: entities/containers.json
    name: container

# Action groups share a concurrency limit across multiple actions. When the
# limit is reached, additional requests are queued and run in order.
# Docs: https://docs.olivetin.app/action_customization/concurrency.html#action-groups
actionGroups:
  backup-jobs:
    maxConcurrent: 1
    icon: backup
  con2queue10:
    maxConcurrent: 2
    queueSize: 10

# Dashboards are a way of taking actions from the default "actions" view, and
# organizing them into groups - either into folders, or fieldsets.
#
# The only way to properly use entities, are to use them with a `fieldset` on
# a dashboard.
#
# Docs: https://docs.olivetin.app/dashboards/intro.html
dashboards:
  # Top level items are dashboards. Optional `category` groups them under
  # collapsible headings in the sidebar (same label = same group).
  - title: My Servers
    category: Infrastructure
    contents:
      - title: All Servers
        type: fieldset
        contents:
          # The contents of a dashboard will try to look for an action with a
          # matching title IF the `contents: ` property is empty.
          - title: Ping All Servers

          # If you create an item with some "contents:", OliveTin will show that as
          # directory.
          - title: Hypervisors
            contents:
              - title: Ping hypervisor1
              - title: Ping hypervisor2
              - title: More hypervisors
                type: directory
                contents:
                  - title: Ping hypervisor3
                  - title: Ping hypervisor4

      # If you specify `type: fieldset` and some `contents`, it will show your
      # actions grouped together without a folder.
      - type: fieldset
        entity: server
        title: 'Server: {{ .CurrentEntity.hostname }}'
        contents:
          # By default OliveTin will look for an action with a matching title
          # and put it on the dashboard.
          #
          # Fieldsets  also support `type: display`, which can display arbitary
          # text. This is useful for displaying things like a container's state.
          - type: display
            title: |
              Hostname: <strong>{{ server.name }}</strong>
              IP Address: <strong>{{ server.ip }}</strong>

          # These are the actions (defined above) that we want on the dashboard.
          - title: '{{ server.name }} Wake on Lan'
          - title: '{{ server.name }} Power Off'

          - title: More Options
            type: directory
            contents:
              - title: '{{ server.name }} Print server name'

  # Second dashboard — same category as My Servers, so both appear under
  # "Infrastructure" in the sidebar.
  - title: My Containers
    category: Infrastructure
    contents:
      - title: 'Container {{ .CurrentEntity.Names }} ({{ .CurrentEntity.Image }})'
        entity: container
        type: fieldset
        contents:
          - type: display
            title: |
              {{ container.RunningFor }} <br /><br /><strong>{{ container.State }}</strong>

          - title: 'Start {{ .CurrentEntity.Names }}'
          - title: 'Stop {{ .CurrentEntity.Names }}'


# Security - Authentication

# This setting effectively enables or disables guests.
# If set to "true", then users will have to login to do anything.
authRequireGuestsToLogin: false

# This form of auth is the simplest to setup - just define users and passwords
# in the config. OliveTin also supports header-based auth, OAuth2,
# and JWT authentication which are documented separately.
#
# Docs: https://docs.olivetin.app/security/local.html
#
# How to get a hashed password:
# Docs: https://docs.olivetin.app/security/local.html#_get_a_argon2id_hashed_password
authLocalUsers:
  enabled: true
#  users:
#    - username: alice
#      usergroup: admins
#      password: "$argon2id$v=19$m=65536,t=4,p=2$puyxA0s555TSFx7hnFLCXA$PyhLGpZtvpMMvc2DgMWkM8OJMKO55euwV5gm//1iwx4"

# Security - Access Control

# Policies affect the whole app (eg: ability to view the log list).
# Docs: https://docs.olivetin.app/security/acl.html
defaultPolicy:
  showDiagnostics: true
  showLogList: true

# Permissions affect actions (eg: ability to view a specific log).
# Docs: https://docs.olivetin.app/security/acl.html
defaultPermissions:
  view: true
  exec: true
  logs: true

# OliveTin uses access control lists to match up policy and permissions to users.
# Docs: https://docs.olivetin.app/security/acl.html
accessControlLists:
  - name: admin_acl
    matchUsergroups: ["admins"]
    policy:
      showDiagnostics: true
    permissions:
      view: true
      exec: true
      logs: true

# OliveTin contains many more configuration options not in this default config.
# Check out docs.olivetin.app for a setting if you feel like you're missing something.